Abstract
The circular economy seeks to better use materials and minimize waste generation. This article evaluated the use of granite rock powder, a mining residue, as an adsorbent for the Basazol Yellow 5G (BY5G) dye and the reuse of the residue generated by the by treating this effluent in construction products. Characterization of the adsorbent material by N2 physisorption indicated a surface area of 1514 m2 g−1. Energy-dispersive spectrometry (EDS) and X-ray diffraction (XRD) confirmed the presence of silica in the sample and the absence of amorphous halos. The kinetic study showed a removal of approximately 98% at 298 K, and the pseudo-second-order model obtained the best fit. The adsorption isotherm satisfied the Langmuir model and was consistent with the L-type isotherm. The negative value of the Gibbs energy (ΔG°) and the positive value of the enthalpy (ΔH°) indicate that the process is spontaneous and endothermic. The activation energy (Ea) indicates the occurrence of chemical adsorption. The desorption rate was low for the adsorbate, demonstrating the possibility of using residual adsorbent material as a filler in mortar and concrete. The material did not exhibit pozzolanic characteristics and, even after adsorption, it showed favorable results when replacing 10% of the cement with GRP viable for use in civil construction even after the adsorption process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.