Abstract
This paper describes the development and testing of a gas sampling probe that quenches chemical reactions by using supersonic expansion and helium dilution. Gas sampling probes are required for accurate measurement of exhaust emissions species, which is critical to determine the performance of an aircraft engine. The probe was designed through rounds of computational modeling and laboratory testing and was subsequently manufactured and then tested at the University of Tennessee Space Institute behind a General Electric J85 turbojet engine at different power settings: idle, maximum military, and afterburning. The experimental test results demonstrated that the chemical quick-quench (CQQ) probe suppressed the oxidation of carbon monoxide (CO) inside the probe system and preserved more CO at afterburning conditions. In addition, the CQQ probe prevented hydrocarbons from being partially oxidized to form CO at idle powers and measured higher hydrocarbons and lower CO emission compared with a conventional probe at that low power condition. The CQQ probe also suppressed nitrogen dioxide (NO2) to nitric oxide (NO) conversion through all engine power settings. These data strongly support the conclusion that the CQQ probe is able to quench unwanted chemical reactions inside the probe for all engine power levels.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.