Miniemulsion polymerization of styrene: Evolution of the particle size distribution

Abstract

AbstractThe mechanism of the miniemulsion polymerization of styrene was investiaged through a combination of calorimetry to monitor the polymerization rate and transmission electron microscopy (TEM) to follow the evolution of the particle size distribution. These techniques proved to be a powerful combination for gaining detailed mechanistic information regarding these polymerizations. Particle size analysis of the latexes withdrawn during the course of the reaction revealed that most of the polymer particles were formed by a relatively low conversion (i.e., 10% conversion). However, nucleation continued well past this point (to 40‐60% conversion). In fact, it was observed that nucleation in miniemulsion polymerizations using cetyl alcohol continued past the maximum in the rate of polymerization. As a result of these long nucleation periods, the latex particle size distributions produced from these miniemulsion polymerizations were broader than their conventional emulsion polymerization counterparts, and were negatively skewed with a tail of small particles. The amount of negative skewing of the particle size distributions was found to decrease with increasing initiator (potassium persulfate) concentration. Finally, a correlation was observed between the length of time to the maximum polymerization rate and the breadth of the particle size distribution as reflected in the standard deviation. © 1995 John Wiley & Sons, Inc.