Miniaturized optical rotation detection system based on liquid crystal variable retarder in a K-Rb-21Ne gyroscope.

Abstract

Listen

Translate article

A novel method to control the light intensity stability and modulate the probe light polarization using a liquid crystal variable retarder (LCVR) to detect atomic spin precession simultaneously in a K-Rb-21Ne gyroscope is reported. A sinusoidal driving voltage is applied to drive the LCVR and is skillfully used to produce a high-frequency modulation for the probe light. The modulation helps to avoid electronic detection noise appearing at low frequencies and allows for phase-sensitive detection. The coefficient of rate ramp can be reduced from 1.31 (deg/h)/h to 0.05 (deg/h)/h (Allan deviation), and the bias instability of about 0.08 deg/h at the averaging time of 200 s is achieved. Therefore, the long-term stability of the angular velocity measurement can be improved and other optical modulators can be replaced to facilitate the miniaturization of the gyroscope by using this intensity modulation detection method. This optical rotation detection method also can be applied to other miniaturized atomic sensors, such as atomic magnetometers.