Abstract

In this paper, a compact high-pass filter (HPF) with a sharp rejection response based on the balanced composite right-left handed (CRLH) transmission line (TL) concept is proposed. A series LC resonator using an interdigital capacitor and meander lines is designed. Also, a meander spiral complementary split ring resonator (MSCSRR) is used to realize the parallel LC resonator. The high-pass filter is implemented in microstrip technology by etching MSCSRR, in the ground plane, and series interdigital capacitor with meander lines, in the signal strip. Because of a smaller electrical size of the proposed MSCSRR and also by using meander lines instead of conventional transmission lines, the total physical dimension of the proposed high-pass filter has been reduced. A detailed analysis of the structure, based on the equivalent circuit model is provided. The structure exhibits a balanced CRLH behavior and by properly tuning the geometry of the elements, a high-pass response with a sharp transition band is obtained. To validate the design concept, the proposed high-pass filter has been fabricated and tested. Experimental verification is provided and a good agreement has been found between the simulation and measurement results. To our knowledge, the size of proposed HPF is more compact in comparison with known similar filters.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.