Abstract

Shale samples of lacustrine Shahejie Formation from the Well F39X1 drilled in Qikou sag were used to study microstructures, mineralogy, and organic geochemistry and their impacts on oil storage response. Samples are quartz and clay rich and contain a variable amount of calcite, dolomite, plagioclase, and pyrite minerals. The TOC content ranges between 0.33 and 2.59 wt %, Rock-Eval S 1 and S 2 values range from 0.05 to 1.07 mg/g and 0.12–9.57 mg/g, respectively. The maximum yield temperature (T max ) of pyrolysate ranges from 440 °C to 467 °C, and vitrinite reflectance calculated based on T max between 0.76 and 1.25%. High frequency 2D nuclear magnetic resonance (NMR) results show free oil contents are 1.176–1.909 μl/g, with an average of 1.542 μl/g. Mineral-related pores are dominant and volumetrically significant with a multimodal pore-throat size distribution, they could provide significant storage space and have good microstructural connectivity. Their roles in microscopic storage of oil molecules mainly depends on two mechanisms: (1) rigid mineral grains preserve large pore networks, within which residing a very large volume of free oil, and (2) clay particles existed within large interparticle pores alter pore throat size distribution, resulting in a slight increasing of adsorbed oil onto pore walls. The Well F39X1 is an important shale oil exploration well for Shahejie Formation. To reduce exploration risk and determine economic feasibility, knowledge of liquid hydrocarbon molecule microscopic storage mechanism is required so producible shale oil resources can be quantified. The investigation of oil-bearing shale mineralogy, organic geochemistry, and microstructures is an important step in better understanding of the pore network development and their related microscopic storage mechanism for oil in lacustrine shale. We suggested that siliceous Shahejie shales in Qikou sag with moderate TOC and suitable thermal maturity have well-developed pore networks and high residual hydrocarbons, which should be the important target for lacustrine shale oil exploration. Also, the well-developed mineral-related pore networks should be included in attempts to build realistic microscopic storage models of shales. • Four typical pore types in Shahejie Formation of Well F39X1 are identified. • Mineral-related pores are dominant and volumetrically significant in pore networks. • Oil molecule type, distribution, and content are identified by high-frequency 2D NMR. • Two microstructural models are proposed to reveal shale oil storage mechanism.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call