Mineralogical Characteristics and Arsenic Release of High Arsenic Coals from Southwestern Guizhou, China during Pyrolysis Process

Abstract

Coal is the primary energy source in China, and coal pyrolysis is considered an essential and efficient method for clean coal utilization. Three high arsenic coals collected from the southwestern Guizhou province of China were chosen in this study. Low-temperature ashing plus X-ray diffraction analysis (XRD) was used to identify the minerals in coals. The three coals were pyrolyzed in a tube furnace in an N2 atmosphere at 950 °C, 1200 °C, and 1400 °C, respectively. Environment scanning electron microscope (ESEM), XRD, X-ray fluorescence analysis (XRF), and inductively coupled plasma-mass spectrometry (ICP-MS) were adopted to determine the morphology, mineral compositions, and element compositions and arsenic contents of the coal pyrolysis ashes, respectively. It can be found that minerals in coal are mainly composed of quartz, pyrite, muscovite, and rutile. The minerals in the ashes generated from coal pyrolysis mainly contain quartz, dehydroxylated muscovite, iron oxide minerals, mullite, and silicon nitride. Oldhamite and gupeite exist at 950 °C and 1400 °C, respectively. The morphologies of oldhamite and gupeite at these temperatures are irregular block-shaped particles and irregular spherical particles, respectively. The mineralogical transformations in the process of coal pyrolysis affect coal utilization. The arsenic release rate is higher than 87% during pyrolysis at 1400 °C. The arsenic in organic matter is more able to be volatilized than mineral components. The retention time can slightly influence the arsenic release rate, and the influence of temperature is much more significant than the influence of retention time. The understanding of mineral evolution and arsenic environmental emission is helpful for the safety of high-arsenic coal pyrolysis.