Abstract
Abstract The mineralogical and chemical evolution of ochreous precipitates forming from acid mine drainage (AMD) from the abandoned Libiola Fe–Cu-sulfide mine (Eastern Liguria, Italy) was followed through a multianalytical approach (XRD, TEM, XRF, ICP) applied to surface precipitates and associated waters collected from several mine adits. The mineralogy of the precipitates changed significantly as a consequence of the variations of the chemical parameters of the circulating solutions (mainly pH, Eh, and sulfate concentrations) which, in turn, were mainly controlled by mixing with unpolluted stream and rill waters of the mining area. A progressive transition from jarosite-, to schwertmannite-, to goethite-, to ferrihydrite-, to amorphous-dominated precipitates was observed, mainly as a consequence of an increase in the pH of the associated solutions. This mineralogical evolution agrees well with the aqueous speciation and Eh–pH stability calculations performed on the waters associated with the different precipitate types. Furthermore, TEM analysis indicated that metastable pristine phases (schwertmannite) tend to transform progressively to well-crystallized more stable species, here represented by goethite. The comparison of the water chemistry and the crystal chemistry of the different precipitates showed a significant decrease in the Zn, Cu, Ni, Co contents in waters where the coexisting precipitates were almost exclusively composed of goethite. The distribution of V, Sr, As concentrations within the different precipitates showed that the most efficient scavenging phase for these elements was jarosite, whereas ferrihydrite efficiently took up Pb ions, and schwermannite acted as a natural sink for Cr. The comparative analysis of the precipitates and waters of the Libiola mining area indicated that the authigenic Fe-oxyhydroxides play an important role in controlling the composition of the highly polluted AMD waters, but this role as “cleaning agents” was mostly ephemeral. Minor pH–Eh oscillations facilitated quick mineralogical transformations, via dissolution–reprecipitation or solid state transformation, which, in turn, controlled the trace elements that were mobilized or permanently stored within the solid phases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have