Mineral transformation and solidification of heavy metals during co-melting of MSWI fly ash with coal fly ash.

Abstract

Melting is an efficient method to turn municipal solid waste incineration (MSWI) fly ash (FA) into non-hazardous material. Coal fly ash (CFA) was selected as the silica-alumina source to carry out co-melting research with MSWI FA in this work. The effects of the temperature and the CFA content on mineral transformation and the migration characteristics of heavy metals were analyzed. The results showed that the mixtures of MSWI FA and CFA reacted at high temperatures to mainly generate Ca2Al2SiO7, Ca2SiO4, and CaAl2Si2O8 primarily and then melted and formed the amorphous-phase vitreous body when the CFA content was more than 40% and the temperature was higher than 1300 °C. During the melting process, Cd and Pb were almost volatilized, while Cr, Mn, and Ni were almost retained. Besides, the volatilization rates of Cu and Zn fluctuated with the temperature and the CFA content. Suitable treatment temperature and CFA content were conducive to the transformation of the heavy metals in the FA into stable forms, and the melting products were no longer hazardous wastes because the vitreous body could effectively encapsulate heavy metals. This study aims to help reuse the FA and CFA collaboratively and be more environmentally friendly.