Abstract
Mineral carbonation technologies aim at permanently storing CO2 into materials rich in metal oxides. A multi-step mineralization process employing Ca-rich waste streams to precipitate calcium carbonate is investigated in this paper. Ground granulated blast furnace slag (GGBS), phosphorus slag (PS) and steel slag (SS) were employed as feeding materials for the process. Solid to liquid ratio (S/L) is an important factor which affects mineral carbonation and this study examines its effect on the carbonation efficiencies. The main phases present in the carbonated residues were identified using XRF, XRD and SEM–EDS analytical techniques. For the three materials investigated, the carbonation efficiency increased when the S/L ratio decreased (from 50g/L to 25g/L and then 15g/L) because of the dilution effect. In a previous study, where an analog process was employed, efficiency using serpentine was found lower than that calculated here for GGBS and SS, and slightly above PS. This confirms that, in general, waste materials require less energy-intensive carbonation conditions, in comparison to mineral rocks. Finally, the structure of the carbonated particles is also discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.