Abstract
In this paper we report on the design and validation process for the profiled corrugated horn antennas, which feed the bolometer array of a cosmology experiment known as QUaD located at the South Pole. This is a cosmic background radiation polarization project, which demands precise knowledge and control of the optical coupling to the signal in order to map the feeble E- and B-polarization mode structure. The system will operate in two millimeter wavelength bands at 100 and 150 GHz. The imaging horn array collects the incoming signal via on-axis front-end optics and a Cassegrain telescope, with a cold stop in front of the array to terminate side-lobe structure at an edge taper of -20dB. The corrugated horn design process was undertaken using in-house analytical software tools, based on modal scattering, specially developed for millimeter -wave profiled horn antennas. An important part of the instrument development was the validation of the horn design, in particular to verify low edge taper levels and the required well-defined band edges. Suitable feed horn designs were measured and were found to be in excellent agreement with theoretical predictions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Infrared and Millimeter Waves
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.