MIL-101 (Cr) hybrid nanoporous carbon derived MOF as a nano-adsorbent for dye removal using RSM-CCD

Abstract

Metal-organic frameworks (MOFs) are a promising class of nanoporous crystalline materials with potential applications in gas storage, catalysis, biomedical, adsorption, and clean energy. The massive parts of commercial dyes are interring to our environment and are considered danger for humans and animals. In this research work, nanohybrids based on MOFs have been studied as a suitable nanoadsorbent for the adsorption of cationic dyes such as methylene blue (MB). In this article, a nanopore carbon (NPC) was prepared from Zn-MOF. The Zn-MOF NPC with MI-101 NPs has been used to prepare Zn-MOF NPC@MIL nanohybrid by the hydrothermal method. Various XRD, FT-IR, SEM, EDX, TEM, TGA, and BET techniques have been used to characterize the nano adsorbent. Four essential variables effective in adsorption, loading percentage of NPs, initial concentration of MB, contact time and pH, were optimized by Central Composite Response Surface Method (RSM-CCD). The removal percentage (Re%) of MB is equal to 95.7% was obtained under the following conditions: The loading value of 25Wt.%, the MB initial concentration of 50 mg. L-1, contact time 30 min and pH 8. Also, the experimental data were investigated with famous kinetic models and isotherms, and it was observed that MB removal by nanohybrid is correlated with pseudo-second-order kinetic model and Langmuir isotherm.