Abstract
Liquid-Phase Sintering (LPS) is a conventional fabrication route for the densification of alumina and other ceramics. The polycrystalline ceramics processed by LPS contain siliceous phases along the grain boundaries. This wetting of the grain boundaries has a strong dependence on the crystallography of the boundary. The liquid preferentially wets certain orientations while some special boundaries are ‘dry’. The mechanism of dewetting of these boundaries is not well understood. Several approaches have been adopted to study the nature of the liquid-solid interaction at the grain boundaries. In commercial alumina, anorthite is the most commonly found intergranular phase.Basal twist boundaries in alumina which contain a thin layer of anorthite glass have been investigated in the present study. Pulsed laser deposition has been used to deposit thin films of anorthite glass on optically flat basal sapphire. The substrate-film assembly is then bonded to an optically polished basal sapphire by sintering the assembly at 1650°C for 2h.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
