Abstract
The high pressure turbine stage within gas turbine engines is exposed to combustor exit flows that are nonuniform in both stagnation pressure and temperature. These highly turbulent flows typically enter the first stage vanes with significant spatial gradients near the inner and outer diameter endwalls. These gradients can result in secondary flow development within the vane passage that is different than what classical secondary flow models predict. The heat transfer between the working fluid and the turbine vane surface and endwalls is directly related to the secondary flows. The goal of the current study was to examine the migration of different inlet radial temperature and pressure profiles through the high turbine vane of a modern turbine engine. The tests were performed using an inlet profile generator located in the Turbine Research Facility at the Air Force Research Laboratory. Comparisons of area-averaged radial exit profiles are reported as well as profiles at three vane pitch locations to document the circumferential variation in the profiles. The results show that the shape of the total pressure profile near the endwalls at the inlet of the vane can alter the redistribution of stagnation enthalpy through the airfoil passage significantly. Total pressure loss and exit flow angle variations are also examined for the different inlet profiles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.