Abstract
The microwave-assisted titanium nitride (TiN) coating method using TiN powders as a raw material was investigated for hard and smooth TiN coatings by decreasing the energy of the exothermic reaction between the raw powder and air. A titanium-aluminum-vanadium alloy (Ti-6Al-4 V) substrate was buried in TiN powders and irradiated with 2.45 GHz microwaves using a multimode cavity. After microwave processing, TiN films were found to be successfully deposited on the Ti-6Al-4 V substrate without atmospheric control. X-ray diffraction results indicated that face-centered cubic (fcc)-TiN phase increased with increasing temperature. TiN coating films synthesized at 900 °C and 800 °C were smoother than those at 1000 °C. Besides, the TiN films synthesized at 900 °C exhibited 697 HV with arithmetic mean roughness (Ra) = 0.29. These results demonstrated that a hard and smooth TiN film can be obtained using TiN powders as raw materials.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
