Abstract
The prototypical plum-free, one-phase multiferric ferrite BiFeO3 (BFO) is solid, parallel, with a high ferroelectric Curie temperature and Neel temperature and antiferromagnetic and ferroelectric propagation. This work aims to synthesize pure-phase BFO in the quickest possible way. We followed the microwave-assisted solvothermal (MWAST) method to achieve pure-phase BFO in the shortest duration of 3 min. The experiment involves simple optimizations with KOH concentration and microwave power levels. The surface morphology along with magnetic properties of BFO synthesized via the MWAST method are altered with varying KOH concentrations and microwave (MW) power levels. Our X-ray diffraction findings reveal that the pure-phase BFO is formed at 800 W MW power, and the structural characterizations like transmission electron microscopy, field emission scanning electron microscopy with energy-dispersive X-ray analysis have displayed the formation of uniformly distributed spherical microflowers of pure-phase BFO exhibiting a single-crystalline nature. Besides, the magnetic measurements affirmed a reliable weak ferromagnetic behavior (magnetization ∼1.25 emu/g) in BFO synthesized at 800 W MW power. In addition, good dielectric behavior with low dielectric loss was accompanied by frequency-dependent dielectric studies indicating an excellent frequency response of the material, and also the room-temperature ferroelectric properties were studied using a ferroelectric analyzer. The polarization of pure-phase BFO increases with the applied electric field and exhibits unsaturated polarization–electric field loops due to leakage current. Moreover, the Fourier transform infrared spectrum of the synthesized material has indicated the pure-phase BFO, and the Raman data have elucidated the vibrational modes of BFO. Further, the analysis of X-ray photoelectron spectroscopy data has confirmed the presence of fewer Fe2+ ions and oxygen vacancies in the pure-phase BFO. Therefore, the collective characterizations and detailed analysis of BFO material have revealed the uniqueness of the MWAST method in producing the pure-phase BFO in 3 min with improved magnetic and dielectric properties, and hence the BFO synthesized via the MWAST method can be a potential candidate for multiferroic applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.