Abstract
Dynamic loadline analysis illustrating the microwave performance limits of state-of-the-art AlGaN/GaN high electron-mobility transistors (HEMTs) under pulsed RF biasing and drive conditions are presented. Calculation of dynamic loadlines concurrent with load-pull measurements show the increase of the device RF knee voltage with increasing drain voltage as the cause of reduced output power-added efficiency (PAE) at high drain biases. In this study, an 8-GHz saturated output power of 14.1 W (9.4 W/mm) is achieved on a 1500 /spl times/ 0.25 /spl times/ /spl mu/m/sup 2/ AlGaN/GaN HEMT at a pulsed drain bias of V/sub D/=40 V. The pulsed-bias conditions considered here preclude device self-heating as a mechanism responsible for the lower than expected output power and decrease in PAE with increasing drain bias. These data suggest electron trapping associated with the surface of the device between the gate and drain as the mechanism that limits the ultimate power, PAE, and linearity of AlGaN/GaN HEMTs.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
