Abstract

The effects of Li2O–ZnO–B2O3 (LZB) glass additive on the sintering behavior, phase composition, microstructure and microwave dielectric properties of Li2TiO3 (LT) ceramics have been investigated. The addition of a small amount of LZB glass can reduce the sintering temperature of LT ceramics from 1150°C to 900°C without obvious degradation of the microwave dielectric properties. Only a single-phase Li2TiO3 is formed in LT ceramic with LZB glass addition sintered at 900°C for 2h. Typically, the 2.5wt% LZB glass-added LT ceramic sintered at 900°C for 2h can reach a maximum relative density of 94.8% of the theoretical density and exhibits good microwave dielectric properties of εr=22.9, Qf=59,600GHz and τf=+23.7ppm/°C. The XRD, SEM and EDX analyses showed that the ceramic can be co-fired well with Ag electrode, which may be applied for LTCC application.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call