Abstract
In this work, the effect of laser welding on the microstructure was studied for three Advanced High Strength Steels: transformation induced plasticity steel (TRIP), dual phase steel (DP) and martensitic steel. Two sheets of the same steel were laser welded and a microstructural study was performed by optical microscopy, scanning electron microscopy and X-ray diffraction. For all samples the welded zone was constituted by martensite and the heat affected zone shows a continuous change in microstructure depending on temperatures reached and on the different cooling rates. The change in mechanical properties in the welded area was followed by Vickers micro-hardness measurements. Quasi binary phase diagrams were calculated and, according to position of T0 lines, it was deduced that austenite is the primary phase forming during rapid solidification for all steels.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.