Microstructures formed from mixed solders on copper substrate

Abstract

With the development and use of a variety of Pb free solders, it is probable that some solder joints in electronic assemblies may be made with solders of two different compositions. To investigate possible microstructures resulting from such procedure, samples were prepared using small balls of four different Sn–Ag–Cu (SAC) Pb free solders, as well as Sn–Zn–Al solder, melted together with eutectic Pb–Sn solder paste and also various SAC solder pastes, on a copper substrate. It was observed that using eutectic Pb–Sn solder paste with an SAC solder ball introduced some Pb–Sn eutectic microstructure and changed the ternary eutectic present from Ag3Sn–Cu6Sn5–Sn to Ag3Sn–Pb–Sn. Use of an SAC solder paste with Sn–Zn–Al solder introduced an apparent Ag–Cu–Zn ternary compound, replacing Zn lamellae of the Sn–Zn eutectic. With eutectic Pb–Sn solder paste, the Pb–Sn–Zn ternary eutectic was formed. It was noted that use of a high Sn solder results in rapid dissolution of the copper substrate.