Abstract
In this paper, we describe the experimental laser welding of ZA alloy. The formation of the weld demonstrated that pulsed laser welding for ZA alloy was more effective than continuous laser welding. The characteristics of microstructures and properties of the ZA alloy’s bond area welded by pulsed laser were investigated using an optical microscope, X-Ray Diffractometer (referred to as XRD) and other methodologies. The applicable technological parameters include welding speed of 0.9m/min, pulsed laser power of 1.8kW, impulse period of 3ms and duty cycle of 3:4. The average micro-hardness of the laser welding seam zone is higher than that of the ZA alloy substrate, which is as high as 183HV. The microstructures in the weld consist of primary η phase (the white dendritic structure), β phase (the black block distribution around η phase), and eutectic phases (β+η) (platy layer). The average strength of the joints is 119MPa, 70% of that of the base metal.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.