Abstract
A metastable β-titanium alloy Ti–28Nb–13Zr–0.5Fe (TNZF alloy for short) was designed for implant biomedical application. The forged specimens were solute-treated at 850 °C followed by water quenching and then aged at 350 °C, 450 °C, and 550 °C for 2–6 h in order to evaluate the effect of phase transformation during ageing on the biomechanical compatibility of the alloy. The quenched microstructure consists of lath α″ martensite and β phase. A large quantities of shuttle-like ω phase precipitate at 350 °C, leading to the drastic increase of strength and elastic modulus and the decrease of plasticity. Ageing at 450 °C for 4 h, small amount of elliptic ω phase and dot α phase precipitate from β matrix. With increasing ageing time α precipitations begin to coarsen and precipitation free zones (PFZs) form around prior β grain boundaries. Needle-like α phase precipitates on grain boundaries and intra-grains when aged at 550 °C. Both PFZs and grain boundary α precipitates are prone to bring about the intergranular fracture and thus have adverse effects on the tensile strength and fracture plasticity. The quenched microstructure has good combination properties of high strength, high plasticity and low elastic modulus.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
