Abstract
The mechanical behavior and indentation creep of Al-20 wt% Zn bearing alloy has been modified with adding 0.2 wt%, 0.5 wt%, 1 wt%, 1.5 wt% Sn. These bearing alloys were prepared by melt spinning technique. The scanning electron microscopy (SEM) was used to study the morphology of the melt spun alloys and x-ray diffractometer (XRD) for the identification of the phases pre- sent in these melt-spun bearing alloys. The results show that the structure of Al80-x-Zn20-SnX (X = 0.2%, 0.5%, 1% and 1.5%) bearing alloys is characterized by the presence of α-Al of FCC structure and SnZn intermetallic compound of anorthic structure. The Al-20Zn-1.5Sn has a smaller crystallite size and grain size as indicated from X-ray and SEM analysis respectively, which leading to the enhancement of the mechanical properties. The mechanical properties and indentation creep of these bearing alloys were studied by tensile test machine and vickers indentation testing at room temperature, respectively. The Al-20Zn-1.5Sn has higher hardness value and creep resistance than other alloys. This was attributed to the strengthen effect of Sn as a strong solid solution element in Al-matrix. The stress exponent values in the range 2.4 - 4.2 indicate that the grain boundary sliding is the possible mechanism during room temperature creep deformation of melt-spun Al-Zn-Sn bearing alloys.
Highlights
The results show that the structure of Al80−x-Zn20-SnX (X = 0.2%, 0.5%, 1% and 1.5%) bearing alloys is characterized by the presence of α-Al of FCC structure and SnZn intermetallic compound of anorthic structure
The mechanical properties and indentation creep of these bearing alloys were studied by tensile test machine and vickers indentation testing at room temperature, respectively
The stress exponent values in the range 2.4 - 4.2 indicate that the grain boundary sliding is the possible mechanism during room temperature creep deformation of melt-spun Al-Zn-Sn bearing alloys
Summary
Aluminum-based alloys have superior properties such as corrosion resistance, high thermal conductivity, high fatigue strength, building material for metallic. By means of a rapid solidification technique, Al-based (Al-In [10], Pb [11], Sn [12], Cd [13]) alloys have been synthesized with uniform distributions of the fine immiscible particles embedded in the matrix, indicating that the microstructure could be considerably refined with superior microstructure, mechanical and thermal properties compared to their conventionally processed materials It is well recognized [14] [15] [16] [17] [18] that the metallurgical parameters affect considerably the resulting mechanical strengths of distinctive Al-based alloys produced using different manufacturing routes. 1% and 1.5%) rapidly solidified alloys from melt were investigated
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.