Microstructures and Mechanical Properties in Ni3Si-Ni3Ti-Ni3Nb-Based Multi-Intermetallic Alloys

Abstract

ABSTRACTMicrostructure, high-temperature tensile deformation and oxidation property of Ni3Si-Ni3Ti-Ni3Nb multi-phase intermetallic alloys with a microstructure consisting of L12, D024 and D0a phases were investigated. The tensile stress as well as the tensile elongation of these multi-phase alloys increased with increasing Si content, i.e. the volume fraction of L12 phase in the wide range of test temperatures. 50-ppm boron addition to these multi-phase intermetallic alloys resulted in increased tensile stress and tensile elongation. The multi-phase intermetallic alloy with a high Si content had good oxidation resistance, and also the boron addition to this alloy resulted in enhanced oxidation resistance. From an overall evaluation of the properties examined, it was shown that the multi-phase intermetallic alloy, which has a high Si content and is composed of L12 matrix dispersed by D024 and D0a phases, had the most favorable properties as high-temperature mechanical and chemical materials.