Abstract
Powder metal processing permits development of new composites with specific properties required for demanding applications. Complex shaped machine elements like gears and bearings are made of powder metallurgy technique economically. In many applications these machine elements operate under unlubricated conditions and there is a need for materials with good friction and wear characteristics, strength and modulus. In the present study, Fe–C–Cu–Ni alloys with solid lubricant, MoS2, were developed using a simple single stage compaction and sintering. The microstructure, strength, hardness and tribo behavior of the composites were evaluated. The friction and wear characteristics were evaluated using pin-on-disc type tribo test machine. Addition of solid lubricant improved the compressibility and thereby the density of the compacts. Presence of the secondary sulphide phases in the as-sintered compacts improves the hardness and strength. The coefficient of friction and wear loss decreased with addition of MoS2. A simple wear model is proposed to predict the wear loss in these composites. The model predicts wear loss values that are in agreement with the experimental data.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.