Microstructure of copper and nickel irradiated with fission neutrons near 230°C

Abstract

The microstructures of pure copper and nickel specimens were examined by transmission electron microscopy (TEM) following irradiation at ∼ 230°C in a mixed spectrum fission reactor to damage levels between 0.01 and 0.25 displacements per atom (dpa). A high density of small stacking fault tetrahedra (SFT) and dislocation loops was observed in both materials, and a moderate density of small voids was observed in the irradiated copper specimens. From a comparison with published studies, the proportion of SFTs and dislocation loops in copper was observed to be nearly constant over a wide range of damage levels at temperatures between 200 and 250°C. This suggests that nucleation and growth of interstitial loops to visible sizes is rather difficult in copper in this temperature regime. On the other hand, the loop size and density in nickel increased steadily with increasing dose. The defect clusters in nickel formed a {001} planar wall pattern which became visible after damage levels of ∼ 0.1 dpa. Defect cluster patterning was not observed in the irradiated copper specimens.