Abstract
A new process for producing 0.5%Ti-0.07%Zr-Mo alloy with low-oxygen content and high strength at elevated temperature was successfully developed, where the mixed TiC, ZrC and Mo powders were liquid-sintered without addition of C or Mo2C as aids for degassing of oxygen. The developed new TiZrC alloy indicated high strength at elevated temperature even under low forging rate compared to the conventional TiZrO alloy and commercial TZM alloy. Ti and Zr carbides with high melting points were precipitated along Mo grain boundaries in TiZrC alloy, while Ti and Zr combined oxide particles with low melting points were precipitated in Mo grain boundaries in TiZrO alloy. The high strength at elevated temperature in TiZrC alloy will result from the grain boundary precipitation of the carbides, which suppressed grain growth and were stable at elevated temperature. The amount of CO gas emission from the TiZrC alloy were almost equivalent to that from the conventional TiZrO alloy during heating in X ray tube.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Society of Materials Science, Japan
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
