Abstract
The laser powder bed fusion (LPBF) was employed to process the ZK60 Mg alloy. The effect of heat treatment on the microstructure and hardness of LPBF ZK60 Mg alloy was investigated. The results showed that the grain boundary of LPBF ZK60 Mg alloy was composed of a network Mg7Zn3 phase. Three types of precipitated phases were distributed inside the grains: the type-Ⅰ is Zn-rich precipitated phase with Zr-rich core, the type-Ⅱ is Zn-rich precipitated phase without Zr, the type-Ⅲ is Zr-rich particle. When the solution treatment was used, the Mg7Zn3 phase at the grain boundary melted and merged into the matrix. The precipitated phase in the grain mainly evolved into Zn-rich phase with Zn2Zr core. Continue with the aging heat treatment, the rod-shaped β1′-MgZn precipitated phase separated out from the α-Mg matrix. The length of the rod-shaped precipitated phase undergone double aging is longer and the quantity is more than that of the single aging. The rod-shaped β1′-MgZn precipitated phase significantly improved the mechanical properties of LPBF ZK60 Mg alloy. The average hardness increased from 0.88 ± 0.025 GPa to 1.01 ± 0.010 GPa and the ultimate tensile strength increased to 287 ± 4 MPa after the solution treatment plus double aging heat treatment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have