Abstract
In situ reaction-synthesized TiB-reinforced titanium-matrix composite coatings were fabricated using the rapid, non-equilibrium synthesis technique of laser cladding. The Ti and B mixture was the original powders, while the Ti-matrix composite coatings enhanced with TiB were treated on a Ti-6Al-4V surface with different laser scan powers of 2.5 kW, 3.0 kW and 3.5 kW. The phase composition, microstructure evaluation, and microhardness of the cladding coatings were investigated by X-ray diffractometry (XRD), scanning electron microscopy (SEM) and microhardness. The composite coatings mainly consist of black fishbone-shaped -Ti dendrites and white needle-like TiB phases. The microstructure evolution from the top to the bottom of the coatings was investigated. The TiB reinforcement dispersed homogeneously in the composite coatings and a fine microstructure was obtained in a sample fabricated with a laser power of 3.0 kW. The microhardness of the cladding coatings fabricated by different powders was over 2-fold greater than that of the Ti-6Al-4V titanium alloy substrate and achieved a maximum average of 792.2 HV with the laser power of 3.0 kW. The microstructures and properties of the coatings were changed by adjusting of the laser cladding power. The effects of the laser scan power on the microstructure, hardness and friction and wear properties of the laser cladding coatings were investigated and discussed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
