Microstructure evolution and property of high manganese steel coatings by laser shock assisted laser wire cladding

Abstract

Field-assisted laser cladding (FALC) overcomes the limitations of laser cladding through the inherent advantages brought about by the use of various auxiliary energy fields (AEFs). Laser wire cladding (LWC) is limited by the common problems of laser cladding but has a promising future due to the extremely high material utilization rate. In this study, a laser shock assisted laser wire cladding (LSALWC) manufacturing process was proposed. In situ laser shock was introduced into the LWC to obtain finer grains structure and improve product performance. LSALWC does not change the composition of the coating, does not require the use of pretreatment and post-treatment, and does not reduce the efficiency of production. Using high manganese steel (HMS) as the model alloy, LSALWC was employed to achieve the expectation of reducing the proportion of columnar grains, refine the microstructure of columnar grains, and transform columnar grains into equiaxed grains. Compared with the sample (LC) manufactured by LWC, the performance of the sample (LSA) manufactured by LSALWC has been improved, the hardness increased from 285 ± 5 HV0.5 to 303 ± 6 HV0.5, the volume wear rate decreased from 2.1 × 10−4 mm3/N·m to 1.7 × 10−4 mm3/N·m, the primary dendrite spacing of the coating was reduced by 11.5%, and the heterogeneity of coating was more obvious. The cladding process under laser shock was studied using a high-speed camera, and the influence of laser shock on the coating was explained. The mechanism of the performance improvement of the LSA sample was explained. This study showed the disturbance of the molten pool was enhanced by laser shock, and the dendrites at the bottom were deflected or even broken. The broken dendrites were dispersed with the liquid flow and became new nucleation sites. Laser shock increased the supercooling during solidification by reducing the temperature gradient in the molten pool, and created an environment conducive to grain nucleation and growth. This process mitigates various issues in the casting process of HMS and provides a novel method for regulating the grain and microstructure of laser cladding. This research delves into the coupling between the AEF and the dynamic behavior of the molten pool, culminating in a model depicting the evolution of laser cladding solidification under the influence of the AEF, which will provide a new perspective for the research of FALC.