Abstract

Porous TiAl3 intermetallics were fabricated through vacuum reactive sintering from Ti–75Al at.% elemental powder mixture. The phase compositions, expansion behaviors, pore characteristics and microstructure evolution of TiAl3 intermetallics were investigated, and the pore formation mechanism was also proposed. It was found that the actual temperature of compacts showed an acute climb from 668 to 1244 °C in 166s, while the furnace temperature maintained the linear growth of 5 °C/min, which indicated that an obvious thermal explosion (TE) reaction occurred during sintering, and only single-phase TiAl3 intermetallic was synthesized in TE products. The open porosity increased from 22.2 (green compact) to 32.8% after reactive diffusion sintering at 600 °C and rised to 58.7% after TE, then decreased to 51.2% after high-temperature homogenization at 1100 °C. Therefore, TE reaction is the dominated pore formation mechanism of porous TiAl3 intermetallics. The pore evolution in porous TiAl3 intermetallics occurred by the following mechanisms: certain intergranular pores remained among powder particles of green compact, then low-temperature sintering resulted in a further increase in porosity due to the Kirkendall effect. Moreover, TE reaction gave rise to a dramatic volume expansion because of the rapid increase in temperature, and high-temperature sintering caused densification and a slight shrinkage.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.