Microstructure evolution and mechanical properties of thermally sprayed coating modified by laser remelting and injection with tungsten carbide

Abstract

The forming quality of thermally sprayed coatings is often severely impacted by inherent defects, including porosity, microcracks, and mechanical bonding. The poor adhesive strength hinders the utilization of thermal spray technology when fabricating ceramic-reinforced metal matrix composite coatings (MMCCs). Thus, in this study, a negative defocus laser remelting and injection method (LRI) is introduced to modify a thermally sprayed coating with WC ceramics. The microstructure and mechanical property (microhardness, elastic modulus, and wear resistance) evolution of a LRI-modified WC reinforced composite coating is systematically characterized and compared with that for an as-sprayed coating. The LRI method is proven to improve the inherent defects of the initial coating and avoid severe reactions and dissolution of reinforced particles at high temperatures, and can be used to form a high-quality composite coating with a maximum strengthening effect of the ceramic particles. Compared with the initial coating, the elastic modulus and microhardness of the LRI coating are increased by 57.22% and 111.06%, respectively, whereas the abrasion rate is decreased by 54.33%.