Abstract
High-entropy alloys (HEAs) have garnered significant attention for their exceptional properties, with eutectic high-entropy alloys (EHEAs) emerging as particularly notable due to their incorporation of eutectic structures comprising soft and hard phases. This study investigated the influence of shear strain on the microstructural refinement and mechanical properties of AlCoCrFeNi2.1 EHEAs, which were subjected to high-pressure torsion (HPT) at room temperature under a pressure of 6 GPa across 0.5 to 3 turns, compared to the initial material. After HPT treatment, significant grain refinement occurred due to strong shear strain, evidenced by the absence of B2 phase peaks in X-ray diffraction (XRD) analysis. Microhardness increased substantially post-HPT, reaching a saturation point at approximately 575 HV after three turns, significantly higher than that of the original sample. Moreover, the ultimate tensile strength of HPT-treated specimens reached around 1900 MPa after three revolutions, compared to approximately 1100 MPa for the as-cast alloy, with a mixed fracture mode maintained. This investigation underscores the efficacy of HPT in enhancing the mechanical properties of AlCoCrFeNi2.1 EHEAs through microstructural refinement induced by shear deformation, offering insights into the design and optimization of advanced HEAs for various engineering applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
