Abstract
The microstructure evolution and age-hardening response for different Sm/Sn ratios (0–2.55, in wt.%) of Mg-Sn-Sm alloys were investigated. The second phase formation in as-cast alloys and the Mg3Sm precipitates formed in aged alloys were characterized using XRD, FESEM and HAADF-STEM with EDS techniques. Results indicate that the Sm/Sn ratio has a great influence on the phase constitution, α-Mg grain size and age-hardening response. With the increment of Sm/Sn ratio, Mg41Sm5 and thermally stable MgSnSm phases precipitate. When the Sm/Sn ratio is about 1.19, the secondary dendrite arm spacing of α-Mg grains significantly decreases. Furthermore, the alloy with Sm/Sn ratio up to 2.55 exhibits the highest age-hardening response, the hardness value increases from 52 HB at solution-treated condition to 74 HB at peak-aged condition (ageing at 220 °C for a short time of 4 h). This is attributed to the large volume fraction of needle-like Mg3Sm precipitates formed in the α-Mg matrix during ageing treatment, which results in a significant precipitation strengthening effect.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
