Abstract
The present study has been carried out in order to investigate the microstructural properties of WCCo-Mo composite coatings deposited onto a SAE 4140 steel substrate by high velocity oxygen fuel (HVOF) thermal spray. For this purpose, the Mo quantity added to the WCCo was changed as 10, 20, 30 and 40 wt. % percents. The coatings are compared in terms of their phase composition, microstructure and hardness. Phase compound and microstructure of coating layers were examined using X-ray diffractometer (XRD) and scanning electron microscope (SEM). XRD results showed that WCCo-Mo composite coatings were mainly composed of WC, W2C, Co3W3C, Mo2C, MoO2, Mo and Co phases. The average hardness of the coatings increased with increasing Mo content.
Highlights
The present study has been carried out in order to investigate the microstructural properties of WCCo-Mo composite coatings deposited onto a SAE 4140 steel substrate by high velocity oxygen fuel (HVOF) thermal spray
The Mo quantity added to the WCCo was changed as 10, 20, 30 and 40 wt. % percents
The coatings are compared in terms of their phase composition, microstructure and hardness
Summary
SAE 4140 çeliğinin yüzeyinde WCCo-Mo esaslı kaplamaların üretilmesinde yüksek hızlı oksi yakıt (HVOF) püskürtme yöntemi kullanılmıştır. Kullanılan alt tabakanın ve tozların kimyasal bileşimi Tablo 1’de verilmiştir. Kaplama tozlarının alt tabakaya iyi bağlanmasını sağlamak için %80 Ni ve %20 Cr bileşimine sahip NiCr tozu kullanılmıştır. Tablo 1: Alt tabaka ve kaplama tozlarının kimyasal bileşimi. Ø20x100 mm ölçülerinde kullanılan alt tabakalar aseton çözeltisinde temizlendikten sonra kaplama tabakasının daha iyi bağlanması için 24-35 mesh arasındaki tane boyutuna sahip Al2O3 kumu ile kumlama işlemine tabi tutuldu. Kaplama işleminde kullanılan püskürtme parametreleri Tablo 2’de verilmiştir. Toz taşıyıcı gaz olarak azot kullanıldı ve kaplama işleminden sonra alt tabakalar yüksek basınçlı hava jetleri ile soğutuldu. Her bir kaplamada, mikroyapı ve faz analizi için taramalı elektron mikroskobu (SEM) ve X-ışını difraksiyonu (XRD) analizlerden faydalanılmıştır. O2 akışı (l/dk.) Fuel gaz (Hidrojen) akışı (l/dk.) Toz besleme miktarı (g/dk.) Püskürtme mesafesi (mm) Taşıyıcı gaz (N2) akışı (l/dk.)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have