Abstract
Lift-off and section characteristics at the interface of thermosonic bond are observed by using scanning electron microscope (KYKY2800) with EDS-test. Results show that the peeling underdeveloped bonds simulate a torus (or doughnut) with an unbonded central region and ridged peripheral region is bonded hardly. Inside roundness at flip chip bonding center are discovered. Bond strength is located between the severely ridged periphery and the non-adhering central area of the bond. For constant force and time, the ridged area of the bond pattern increases when more power is applied. For constant force and power, the ridged location of the bonded region moves closer to the bond center with time. Results of EDS-tests at Au-Al and Au-Ag interfaces show that Kirkendall diffusibility at Au-Ag interface occur and the diffusing speed of Au-atomic is faster than that of Ag,and that intermetallic compounds at Au-A1 interface is generated possibly. And these would be helpful for further research about thermosonic bonding.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Chinese Journal of Mechanical Engineering (English Edition)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.