Microstructure and tribological properties of solid lubricant-doped CMT-WAAMed Stellite deposits

Abstract

AbstractA large share of the world’s total energy consumption is used to overcome friction. Therefore, low friction wear-resistant materials are needed. Solid lubricants are solid-phase materials that can reduce friction at different temperatures between two surfaces sliding against each other without the need for a grease or liquid oil medium. In this study, Cold Metal Transfer Wire Arc Additive Manufacturing (CMT-WAAM) was used to deposit solid lubricant (WS2, MoS2, CaF2) doped hypoeutectic Stellite alloy. Fabricated deposits possessed crack- and pore-free microstructures consisting of γ-Co and M7C3 carbide eutectics embedded with chromium sulfides and microhardness values of ~ 530 HV1. They were also tested in self-mated unidirectional sliding wear tests in dry conditions at room temperature (RT) and at 300 °C in an air atmosphere. The results showed that the dynamic coefficient of friction (COF) decreased ~ 27% at RT and ~ 21% at 300 °C without losing the wear properties. During sliding wear tests severe strain hardening occurred and γ-Co was found to transform to ε-Co. The developed deposits can be used as hard facings or 3D printed components in applications that require good sliding wear properties at different temperatures such as metal forming tools, power transmission components, valves, and internal parts of combustion engines.