Abstract
Paper-related production of composite materials from Al2O3-pre-composite powder (NiAl–10 wt pct Al2O3). PPS allowed for forming ceramic–intermetallic composites. MA produced the pre-composite powder. Six series of composites were made, differing in temperature (1200 °C, 1300 °C, 1400 °C) and content of pre-composite powder (2.5 and 5 wt pct with respect to the amount of Al2O3). Highest hardness was obtained for composite series sintered at 1300 °C. Both series, with various pre-composite powder content, had a value of 20.8 to 20.9 GPa. Samples containing 2.5 wt pct pre-composite powder sintered at 1200 °C were highest KIC value of 4.72 ± 0.34 MPa·m0.5. Interestingly, the same value was obtained in composites containing 5 wt pct pre-composite powder sintered at 1300 °C. For both series with different pre-composite powder content, sintering at 1400 °C obtained the highest strength. For composites containing 2.5 wt pct pre-composite powder, splitting tensile strength value was 255.98 MPa, while for samples with 5 wt pct, pre-composite powder was 264.01 MPaGraphical
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
