Microstructure and reactivity evolution of colloidal silica binder in different systems at elevated temperatures

Abstract

Colloidal silica as nanostructured binder for refractory castables has attracted many attentions in recent years. In the present study, phase composition, microstructure and reactivity evolution of silica gel at different heating conditions were investigated to find suitable system for colloidal silica application. The results showed that atmosphere and carbon slightly affected phase composition of the silica gel at elevated temperatures, and the crystalline phases were composed of major α-cristobalite and minor α-tridymite. The morphology and particle size of the silica gel were greatly affected by atmosphere and carbon during heating. The spherical nano-silica particles with sizes of 40–50 nm rapidly grew into macroscale rod-like particles with temperature increasing from 800-1000 °C to above 1200 °C in air, and sintering of silica particles was observed. However, the size and morphology of the spherical nano-silica particles retained at high temperature in a reducing atmosphere, and many well developed columnar mullite crystals and some SiC whiskers formed on heating silica gel, alumina fines and carbon at 1500 °C, which was due to carbon inclusions retarding the growth of nano-silica particles and the nano silica remained high reactivity at high temperature. Thus, colloidal silica was suitable for application in carbon-containing refractory castables.