Abstract
The microstructure and nonohmic properties of SnO 2– Ta 2 O 5– TiO 2- CuO varistor system were investigated. The proposed samples were doped with different contents of CuO (0–6 mol%) and sintered at 1400°C for 2 h with conventional ceramic processing method. In all the samples, the commonly identified phase was SnO 2 (rutile); however, with increasing doping amount of CuO , the peaks of CuO phase emerged in the X-ray diffraction (XRD) patterns. Scanning electron microscopy (SEM) examination on the fractured surfaces of the samples revealed that a minor amount of CuO dopant can facilitate the sintering of the varistor ceramics, but excessive CuO would mainly segregate at grain-boundaries. The doped CuO may also act as a modifier in the SnO 2 based varistors. The measured electric-field versus current-density characteristics of the samples indicated that both nonlinear exponent and varistor voltage increased with increasing doping amount of CuO up to 3 mol% and then decreased with excessive CuO .
Submitted Version (
Free)
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
