Microstructure and Mechanical Property Stability of Wire Arc Directed Energy Deposition Austenitic Stainless Steels During Thermal Aging at 650°C

Abstract

Austenitic stainless steels are used in power generation components subjected to elevated temperatures over long service lives. Replacing these components can involve lengthy lead times and deteriorate the robustness of the energy infrastructure. Wire arc directed energy deposition (WA-DED) has the potential to enable rapid manufacturing of replacement parts, but the long-term stability of microstructures and mechanical properties produced by WA-DED is not well understood. In this work, we explore the influence of aging at 650°C for 1000 h on the formation of embrittling phases, such as sigma (σ), in the commercially available austenitic stainless steel wire feedstocks 316L, 316LSi, 316H and 16-8-2. All WA-DED samples formed secondary phases at grain boundaries (likely σ, possibly other phases as well), but these phases caused negligible changes in tensile properties in 316L, 316LSi and 316H. Samples of 16-8-2 formed significant amounts of ferrite and/or martensite after aging, which increased tensile strength but reduced ductility when tested at room temperature. This work demonstrates the need to design feedstock compositions that are stable with respect to ferrite and/or martensite formation, in addition to phases typically associated with embrittlement, to ensure microstructure and mechanical property stability for high-temperature applications with long service lives.