Abstract
Abstract Ultrasonic spot welding of Ti6Al4V and TiNi shape memory alloy (SMA) dissimilar joints with an Al coating interlayer were investigated. The influence of welding pressures on the macro/microstructures and tensile shear properties were evaluated. The results show that successful joining of Ti6Al4V and TiNi SMA dissimilar materials can be achieved by selecting proper welding pressure. Intermetallic compounds such as Al3Ti were formed in the dissimilar material joints. The tensile shear loads of the joints were increased first then decreased as the welding pressure continually increasing. When the welding pressure and welding time is 0.52 MPa and 0.5 s respectively, the tensile shear load was 931 N. The dissimilar alloy joints failure at the interface of Al coating and TiNi SMA with a brittle fracture mode.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
