Abstract
The tungsten inert gas (TIG) welding–brazing technology using Mg based filler was developed to join AZ31B Mg alloy to TA2 pure Ti in a lap configuration. The results indicate that robust joints can be obtained with welding current in the range of 60–70 A and welding speed of 0·2 m min−1. The joints were found to be composed of the coarse grained fusion zone accompanied with the precipitated phase of Mg17Al12, and a distributed Mg–Ti solid solution zone at the interface of Mg/Ti, indicating that metallurgical bonding was achieved. The maximum tensile–shear strength of 193·5 N mm−1, representing 82·3% joint efficiency relative to the Mg alloy base metal, was attained. The optimised Mg/Ti joint fractured at Mg fusion zone upon tensile–shear loading, mainly caused by grain coarsening. Moreover, the fracture surface practically consisted of scraggly areas, which was characterised by equiaxed dimple patterns accompanied with a few lamellar tearing.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
