Abstract
Aluminum and its alloys are used in a wide range of industrial applications from low density, high strength and a variety of structural materials. In this study, the effects of Ca addition on the microstructure and mechanical properties of Al-1wt.%RE alloys were investigated. The melt was held at 800 °C for 20 minutes and poured into a mold. The cast Al alloy was hot extruded with a rod having a diameter of 12 mm and a reduction ratio of 38:1. Al-1wt.%RE alloy consists of Al, Al11RE₃ phase. The Al₂Ca phase is increased by increasing the Ca content to 0.2 to 0.4 wt.%. As the Ca content increased from 0 to 0.4 wt.%, the average grain size of the extruded Al alloy decreased by 739.8, 400.8 and 155.0 μm. The tensile strengths were increased to 74.25, 76.53, and 79.52 MPa. The electrical conductivity of Al-RE alloy with Ca addition decreased to 60.32, 58.15 and 57.89% IACS.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
