Abstract
A new semisolid metal processing technology, rheo-diecasting (RDC) has been developed for production of Mg-alloy components with high integrity. The RDC process innovatively combines the dispersive mixing power of the twin-screw mechanism for creation of high quality semisolid slurry and the high efficiency, low cost nature of the high pressure die casting (HPDC) process for component shaping. AZ91D Mg-alloy was used to optimise the RDC process and to establish its advantages over both the HPDC process and other existing semisolid processing techniques. In this paper we present the RDC process for processing Mg-alloys and the resulting microstructure and mechanical properties of RDC AZ91D alloy. The solidification behaviour of the Mg-alloys in the RDC process and the co-relationships between microstructure and mechanical properties of the RDC AZ91D alloy are discussed. It was found that the RDC process is capable of producing Mg-alloy samples with close-to-zero porosity and a fine, uniform microstructure throughout the entire sample irrespective of the section thickness. Compared with those obtained by other existing processing techniques, the RDC samples have substantially improved or equivalent mechanical properties, with the tensile elongation showing more than 100% improvement.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have