Microstructure and mechanical properties of oxide dispersion strengthened FeNiMnCr high-entropy alloy fabricated by spark plasma sintering

Abstract

High-entropy alloys (HEAs) strengthened by dispersed oxide nanoparticles are considered potential structural materials used in advanced nuclear reactors. Herein, a novel Y-Si-O nanoparticle-strengthened near-equiatomic FeNiMnCr HEA was prepared via the powder metallurgy method. Microstructural characterizations revealed that the oxide dispersion-strengthened (ODS) FeNiMnCr HEA consisted of the face-centered cubic (FCC) matrix and high-density Y-Si-O nanoparticles (Y2SiO5 and Y2Si2O7). The average diameter and volume fraction of the nanoparticles were counted to be 21.3nm and 1.02%, respectively. The grain size was reduced from 10.13 μm of the FeNiMnCr HEA to 0.79 μm of the ODS FeNiMnCr HEA. The ODS FeNiMnCr HEA showed a yield strength of 1125MPa, an ultimate tensile strength of 1137MPa, and a moderate elongation of 8.3% at room temperature. At 500°C, the ODS FeNiMnCr HEA also had a high yield strength of 662MPa. Theoretical calculation showed that the high strength of the ODS FeNiMnCr HEA was mainly due to the grain boundary strengthening, dislocation strengthening, and precipitation strengthening.