Abstract
The microstructure and mechanical properties of friction stir welded Al-Zn-Mg-Cu alloy sheet were investigated by means of hardness and tensile tests, optical microscope and scanning electron microscope. The hardness profile of the weld exhibits a W shape with the lowest value in the thermo-mechanically affected zone on the advancing side. The tensile strength and elongation of the weld are about 71% and 72% that of the base material. In the nugget zone, there are a number of fine recrystallized grains and dispersed precipitates at grain boundaries. In the thermo-mechanically affected zone, the grain size is not uniform and there are a number of precipitates at grain boundaries. In the heat affected zone, the grain structure is similar to the base material.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
