Abstract
Fe-based metallic glass (FMG) particles reinforced Al-2024 matrix composites were fabricated by using the powder metallurgy method successfully. Mechanical alloying result in nanostructured Al-2024 matrix with a grain size of about 30nm together with a good distribution of the FMG particles in the Al matrix. The consolidation of the composites was performed at a temperature in the super-cooled liquid region of the FMG particles, where the FMG particles act as a soft liquid-like binder, resulting in composites with low or zero porosity. The microstructure and mechanical properties of the composites were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and compression test. The yield and fracture strength of the composites are 403MPa and 660MPa, respectively, while retaining a considerable fracture deformation of about 12%. The strengthening mechanism is associated with the grain refinement of the matrix and uniform distribution of the FMG particles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.