Abstract
Porous mullite samples were manufactured using granular mullite powders as major materials, and TiO2 as the additive agent. Influences of TiO2 contents on rheological characteristics of slurries, and microstructure and bending strength at 25–1400 °C of final porous mullite products were investigated. Adding appropriate content of TiO2, a large amount of columnar mullite with mean length of 23.7 μm and the length-to-diameter ratio of 6.7 was in-situ formed, which could improve the mechanical performance of the resultant porous samples. The bending strength at 25 °C of porous products containing 67% porosity fabricated by using 7 wt% TiO2 reached 12.5 MPa, and its bending strength at 1200 °C remained as high as 6.1 MPa.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
