Abstract
A powder blend of Ni particles embedded in Al flakes obtained after high energy ball milling was used to reinforce an AlMg alloy using friction stir processing (FSP). The mechanical activation provided by both ball milling and FSP resulted in the in-situ formation of nickel aluminides during FSP, which was distributed throughout the nugget zone. The average grain size after FSP was 8.3 μm. High dislocation density was observed in the vicinity of the reinforcements. The yield and ultimate tensile strengths of the composite improved by 123% and 78% respectively. The tensile elongation of the composite was 23% and the base material, 32%. The toughness of the composite improved by 42%. At elevated temperatures (200 °C and 300 °C), the composite exhibited a decrease in strength but an increase in ductility with increasing temperature.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
